High Temperature Water Filter Pleated Type 20"/40"/60"Length 5 Micron Rating
General Description
PHFLH Series High Flow Filter Cartridge is made of diameter 6"(152mm), single open end, without inner core, inside to outside flow direction. Filter body is Polyester pleated. End caps and filter layer using thermal melting welding, no any bonding agent, with a wide range of chemical compatibility. High temperature resistance, widely used in high temperature conditions.
Performance Specifications
Dimensions(nominal)
| OD |
6” (152mm) |
| Length |
20"/40"/60" |
Material of Construction:
| Model |
PHFLH |
| Filter Media |
Polyester |
| Support/Drainage |
Polyester |
| End Caps |
Glass Fiber Reinforced Polypropylene |
| Seals Material |
NBR, EPDM, Silicone, Viton |
Filter Performance
| Micron |
1um, 5um, 10um, 15um, 20um, 40um, 70um, 100um |
| Maximum operating temperature: |
Pleated polyester: 121℃ |
|
Maximum operating differential pressure
(Inside to outside flow direction)
|
Pleated polyester: 3.44bar@121℃ |
| Suggestion pressure for filter replacement |
2.5Bar@20℃ |
| Suggestion design flow |
40": 70m3/h |
| 60": 110m3/h |
Application:
General Purpose: RO Pre-filtration, all kinds process water purification
Industrial filtration: Process fluid, process water, condensed water, coolant, wastewater treatment;
Food and Beverage: Process water;
Petrochemical: Various solvents, chilled water, brine filtration
Power Plant: supplementary water, condensate water, coolant
Product Features:
* Single cartridge could achieve flow rate 110m3/h
* Special material suitable for high temperature conditions
* Stainless steel outer cage ensure high strength
* Filtration systems are 50% smaller than typical size system
* Inside to outside flow direction keeps all of the contamination catched.
Product Tags:
|
|
High Temperature Water Filter Pleated Type 20"/40"/60"length 5 micron rating Images
|
